Table of Contents
Advertisement
Installation
Example of the projector and screen installation
Determine picture size and projection distance as illustrated below.
View from the top
Screen
a (inch)
Screen (inch)
Minimum
Maximum
40
60
89
60
89
134
80
119
179
100
149
224
120
179
269
150
224
336
200
448
298
How to use foot adjusters
Adjust the projection position using the foot adjusters at the bottom of the projector.
View from the front
Foot adjuster
1. Lift up the projector, unlock the foot adjusters.
2. Adjust a viewing angle, and then lock the foot adjusters complete.
3. To adjust the angle slightly, revolve the foot adjusters.
Do not unlock the foot adjusters while you do not support the projector, to avoid falling of the
Caution
projector and causing an injury.
Do not revolve the foot adjusters by force, the foot adjusters is damaged.
If the foot adjusters do not lock completely, move the foot adjusters a little before locking.
b
a: Distance from the projector to the screen. ( 10%)
b (inch)
b: Length from the center of the lens to the bottom of the
picture. ( 10%)
3.4
This screen size is full-screen size. (1024 dots 768 dots)
5.1
Installation of liquid crystal projector
6.9
Please basically use liquid crystal projector at the horizontal
8.6
position.
10.3
If you use liquid crystal projector by the lens up position, the
12.9
lens down position and the side up position, this may cause the
heat inside to build up and become the cause of damage.
17.2
unlock
lock
View from the side
Lens center
a
View from the side
A viewing angle of 2 ~ 12 can be changed.
11
Advertisement
Table of Contents
