Assembly Instructions - Stamina Outdoor Strider Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Refer to the illustration below. Position the REAR STABILIZER(8) with the flange plates facing out,
then attach it to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x15mm)(15) and ARC
WASHERS(M10)(16).
STEP 2
Attach the FRONT STABILIZER(7) with the flange plates facing out to the MAIN FRAME(1) with
BUTTON HEAD BOLTS(M10x1.5x15mm)(15) and ARC WASHERS(M10)(16).
15
16
Flanage Plates
face out.
REAR
15
8
15
16
16
1
15
16
7
FRONT
7