Easy Menu - Hitachi CP-X268A Operating Manual

EASY Menu

With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
Item
ASPECT
AUTO
KEYSTONE
EXECUTE
KEYSTONE
PICTURE MODE
BRIGHTNESS
Using the buttons ◄/► switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu (32).
Using the button ► executes the auto keystone function.
See the AUTO KEYSTONE EXECUTE item in the SETUP menu (37).
This function will be unavailable when Transition Detector is on (50).
Using the buttons ◄/► corrects the keystone distortion.
See the item KEYSTONE of section SETUP menu. (37)
This function will be unavailable when Transition Detector is on (50).
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP. Choose a suitable mode according to the
projected source.
NORMAL ó CINEMA ó DYNAMIC
WHITEBOARD ó BOARD(GREEN) ó BOARD(BLACK)
NORMAL: (COLOR TEMP = MID DEFAULT) + (GAMMA = # DEFAULT)
CINEMA: (COLOR TEMP = LOW DEFAULT) + (GAMMA = # DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH DEFAULT) + (GAMMA = #3 DEFAULT)
BOARD(BLACK): (COLOR TEMP = Hi-BRIGHT- DEFAULT) +
(GAMMA = #4 DEFAULT)
BOARD(GREEN): (COLOR TEMP = Hi-BRIGHT- DEFAULT) +
WHITEBOARD: (COLOR TEMP = MID DEFAULT) + (GAMMA = #5
DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to the GAMMA (29)
and COLOR TEMP (30) items in the PICTURE menu.
• When this function is performed, a certain extra such as a line may appear.
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHTNESS in the PICTURE menu (29).
Description
(GAMMA = #4 DEFAULT)
EASY Menu
7