Advertisement
1. To scoop the litter box, simply grab the handle while holding the
receptacle tab (for balance) and pull towards you and the waste
receptacle. The rake will automatically open the lid and place
clumps into the receptacle in one easy motion. If the carriage
assembly jams due to an oversize clump, gently rake back and
forth until the clump loosens.
Note: If using a standard size broom handle, place your foot on the
receptacle tab and pull the broom handle towards the waste
receptacle. As the carriage assembly approaches the receptacle lift
your foot to allow the receptacle lid to open.
2. After the rake pushes the clumps into the receptacle, simply push the
handle back through the litter and into the home position. Be sure the
rake rests against the back wall of the tray before the cat uses the litter
box again.
3. Add litter as needed to maintain fill line.
4. For optimal use, rake at least once a day or more if you have multiple
cats. Replace odor filter as needed.
1. Lift the tray and remove the waste receptacle.
2. Grab the drawstrings on the liner and pull. Dispose of waste and
replace with a new liner.
usage directions
to remove waste
3
Advertisement
