Removing The Computer Cover - Dell Dimension 5100 Service Manual

Back to Contents Page
Removing the Computer Cover
Dell™ Dimension™ 5100 Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
1. Follow the procedures in "Before You
NOTICE: Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk top space.
NOTICE: Ensure that you are working on a level, protected surface to avoid scratching either the computer or the surface on which it is resting.
2. Lay your computer on its side with the computer cover facing up.
3. Pull back the cover latch release located on the top panel.
Back to Contents Page
Begin."