1 power cable
2 data cable
3. Disconnect the power and data cables from the back of the floppy drive.
NOTE:
If you are installing a PCI Express x16 card, this card may cover the floppy-drive connectors. Remove this card before connecting the floppy-drive
cables.
4. Remove the floppy drive by sliding and holding the drive latch release downward. Then, slide the drive out of the computer.
1 sliding plate lever
2 sliding plate
3 floppy drive
Installing a Floppy Drive
NOTE:
In the event the replacement or new floppy drive does not have the shoulder screws, use the screws located within the drive panel insert.