Chapter 5: Connecting The Home Wireless-G Usb Adaptor; Connecting The Adaptor; Figure 5-1: How The Adaptor Connects To Your Pc; Figure 5-2: Adaptor's Usb Port - Linksys HU200 User Manual

2.4ghz 802.11g home wireless-g

Hide thumbs Also See for HU200:

Table of Contents

Home Wireless-G USB Adaptor

Chapter 5: Connecting the Home Wireless-G USB Adaptor

NOTE: You must run the Setup Wizard before connecting the Adaptor.

1. Connect one end of the included USB cable to the Adaptor's USB port.

2. Connect the other end of the cable to one of the USB ports on your computer.

3. The Power LED should light up when the Adaptor is plugged in.

4. Raise the antenna. Make sure the antenna points straight up into the air, at a 90º angle from the Adaptor. This

will ensure optimum wireless operating range and performance.

NOTE: If you want to attach the Adaptor to your wall, go to the next section,

"Using the Adaptor's Wall Mount," before proceeding to "Chapter 6: Using the

Wireless Network Monitor."

Congratulations! The installation of the Home Wireless-G Adaptor is complete.

If you want to check the link information, search for available wireless networks, or make additional

configuration changes, go to "Chapter 6: Using the Wireless Network Monitor."

Chapter 5: Connecting the Home Wireless-G USB Adaptor

Connecting the Adaptor

Table of Contents