Hitachi cp-s318 User Manual page 42

CP-S318/328W/TECHNICAl責了 03.5.27 2:39 PM ページ 1
TECHNICAL
TECHNICAL
SIGNAL CONNECTOR PIN ASSIGNMENT
RGB IN [1]/[2]
RGB OUT
D-sub 15-pin Shrink
Pin No Signal
1 Video input Red
2 Video input Green
3 Video input Blue
4 -
5 Ground
6 Ground Red
7 Ground Green
8 Ground Blue
signal
RGB signal
RGB IN（1、2）
input
Video signal
input
COMPONENT
VIDEO
Audio
AUDIO IN（R、L）
signal input
Signal output
Pin No Signal
9
10 Ground
11
RGB IN [1]: SDA (DDC)
12 RGB IN [2]:
RGB OUT :
13 H. sync./ Composite sync.
14 Vertical sync
RGB IN [1]: SCL (DDC)
RGB IN [2]:
15
RGB OUT :
Terminal
Video: Analog 0.7Vp-p, 75Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
VIDEO IN 1.0Vp-p, 75Ω terminator, RCA jack
Brightness signal: 1.0Vp-p, 75Ω terminator
Color signal: 0.286Vp-p (NTSC, burst signal),75Ω terminator
S-VIDEO IN
Mini DIN 4-pin jack
1.0 Vp-p, 75 Ω Terminator (Positive)
Y
0.7 Vp-p, 75 Ω Terminator (Positive)
C /P
B B
0.7 Vp-p, 75 Ω Terminator (Positive)
C /P
R R
200mVrms, 50 kΩ (max. 3.0Vp-p)
RCA jack
Video: Analog 0.7Vp-p, 75Ω output impedance (positive)
H/V. sync.: TTL level (positive/negative)
RGB OUT
Composite sync.: TTL level
D-sub 15-pin shrink jack
S-VIDEO
Mini Din 4-pin
Pin No Signal
-
Color:
0.286Vp-p (NTSC, burst signal),
-
1 75Ω terminator
0.3Vp-p (PAL/SECAM, burst signal),
- 75Ω terminator
Brightness:
-
2
1.0Vp-p, 75Ω terminator
3 Ground
4 Ground
-
-
Specification
0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator
Mini Din 4-pin
1