Nvidia TESLA C2050 Installation Manual page 10

6
03
HARDWARE INSTALLATIONS
Note: It is important that all power to the computer be
removed (unplugged) before you install the computing board.
You must also discharge your body's static electricity before
handling sensitive components. Simply touch a grounded
surface before beginning.
Note: To simplify reconnections, label cables as they are
disconnected.
1
Turn off your computer and monitor and disconnect the power cord at
the outlet or at the back of your system (depending on the system).
2
Open your computer chassis (refer to your system documentation
for details).
3
Remove the slot bracket for the two adjacent slots, if they are still covered.
The Tesla C2050/2070 computing board is a dual-slot board and will take up
two (2) slots. Save any hardware (such as screws) to use to anchor the Tesla
C2050/2070 computing board after it is seated properly.rail installation.
4
Connect the 8-pin power connector and the 6-pin power connector from
The Tesla C2050/2070 requires
two PCI Express x16 slots.