External Audio Sources; Component Video - Hitachi 61SBX01B Operating Manual

EXTERNAL AUDIO SOURCES

Refer to the operating guide of your other electronic equipment for additional information on
connecting your hook-up cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own
video or line output. (INPUT 1 in example on page 13.) Refer to your VCR operating guide for
more information on line input-output connection.
You may use VIDEO, S-VIDEO, or COMPONENT VIDEO: Y-CB-CR inputs to connect to
INPUT 2, but only one of these may be used at a time.
Connect only 1 component to each input jack.
COMPONENT VIDEO: Y-CB-CR connections are provided for high performance components,
such as DVD players. Use these connections in place of the standard video connection if your
device has this feature.
When using the Y-CB-CR input jacks, connect your components audio output to the TV's
INPUT 2 Left and Right Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the
components B-Y output to the TV's CB input and the components R-Y output to the TV's CR
input.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-CB-CR
inputs. (See pages 54 and 55.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using
Y-CB-CR jacks.
When using the Y-CB-CR jacks, INPUT 2 will be viewed as a blank PIP sub-picture. (see
page 26)
EXTERNAL AUDIO SOURCES
CONNECTING EXTERNAL AUDIO AMPLIFIER
23