Vivotek FE8174 User Manual page 161

bwmode
sensitivity
enableextled
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
saturation
saturationpercent
contrast
sharpness
sharpnesspercent
gammacurve
lowlightmode
profile_i0_enable
profile_i0_policy
profile_i0_begintime
profile_i0_endtime
profile_i0_brightness
<boolean> 1
low, normal
normal,
high
<boolean> 0
VALUE DEFAULT
-5~5 -5
-5~5,100 0
0~100 50
-5 ~ 5 0
-3~3,100 0
0~100 50
0~100 0
<boolean> 1
<boolean> 0
day, night
night,
schedule
hh:mm 18:00
hh:mm 06:00
-5~5 -5
6/6 Switch to B/W in night mode if
enabled
6/6 Sensitivity of light sensor
1/6 External IR led enable
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image
according to mode settings.
4/4 Adjust saturation of image
according to mode settings.
100 for saturation percentage
mode.
4/4 Adjust saturation value of
percentage when
saturation=100
4/4 Adjust contrast of image
according to mode settings.
4/4 Adjust sharpness of image
according to mode settings.
4/4 Adjust sharpness value of
percentage when
sharpness=100
4/4 Gamma curve.
4/4 Enable/disable low light mode.
4/4 Enable/disable this profile
setting
4/4 The mode which the profile is
applied to.
4/4 Begin time of schedule mode.
4/4 End time of schedule mode.
4/4 Adjust brightness of image
according to mode settings.
VIVOTEK
User's Manual - 161