Mercedes-Benz COMAND Operator's Manual page 208

Comand
Hide thumbs Also See for COMAND:
Table of Contents

Advertisement

Navigation
Software Updates
1 Ejecting DVD
2 Opening/closing the display unit
3 Warning message
Press EJECT to
close
You can update the system with a new
navigation DVD. The new DVD may include
new maps and/or new device software.
Warning
The display unit can cause injury if
contacted when open. Please close after
inserting a navigation DVD.
!
Do not place anything on the lowered
display panel. Placing objects on the
lowered display panel may result in
damage to the display or COMAND
unit which is not covered by the
Mercedes-Benz Limited Warranty.
148
i
Updating may take several minutes.
During updating, the operation of
COMAND is restricted. You cannot
switch off the system.
Starting an update
DVDs are loaded and ejected at the
navigation module.
G
i
The navigation module is located
behind the display unit of the COMAND
( page 147).
i
There are two l buttons. One is on
the display unit 2. The other is located
left of the DVD NAVIGATION slot 1
behind the display.
Switch the COMAND on ( page 27).
Ejecting
Press l.
The display unit moves forward and
then tilts down. The DVD NAVIGATION
slot is visible.
Press the l button left of the
DVD NAVIGATION slot.
The navigation module ejects the DVD.
The message
No DVD in drive.
Please insert Navigation DVD.
will appear.
Remove the DVD from the slot.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents