Mercedes-Benz COMAND Operator's Manual page 172

Navigation
Destination input
Push the joystick to H, h, g, G
to move the cross-hairs.
Push the joystick to F or f to move
the cross-hairs diagonally.
112
This allows you to select your destination.
Release the button.
If the system is able to assign a street
name to the selected location, it is
displayed on the status bar.
Press E.
The system uses the point at the center
of the cross-hairs as destination.
The Start route guidance menu will
appear ( page 115).
i
If you press the soft key, your
Back
selection will be discarded. The system
then uses the data of the previous
destination.
i
If a POI is close to the center of the
cross-hairs, a selection list will appear.
You can now select between a POI and
the address destination.