Memory Function - Mercedes-Benz SLK Operator's Manual

The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior
R
mirror on the driver's side

Memory function

Storing settings
G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic
conditions by the seat moving of its own
accord, and as a result cause an accident.
Adjust the seat electrically (
X
On the driver's side, adjust the steering
X
wheel ( page 99) and the exterior mirrors
Y
( page 100).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
Calling up a stored setting
Press and hold the relevant storage
X
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
page 96).
Y
Memory function
103
Z