Status > Dsl Connection; Status > Bridges - Cisco Linksys WAG310G User Manual

Wireless-g adsl2+ gateway with voip
Hide thumbs Also See for Linksys WAG310G:
Table of Contents

Advertisement

Chapter 3
Status > Wireless
Wireless Network
For each wireless network, the following is displayed:
SSID
The name of the wireless network is displayed.
MAC Address
The MAC address of the Gateway's local,
wireless interface is displayed.
Security
The wireless security method is displayed (if
used).
SSID Broadcast
The SSID broadcast setting is displayed.
Click Refresh to update the on-screen information.
Status > DSL Connection
The DSL Connection screen displays information about
your DSL connection.
Status > DSL Connection
DSL Connection
Modulation Type
The DSL modulation mode of the
Gateway is displayed.
Status
The status of the DSL connection is displayed.
Provider
The name of the service provider is displayed.
Wireless-G ADSL2+ Gateway with VoIP
Advanced Configuration
Downstream Rate
The download speed of traffic from
the Internet to the Gateway is displayed.
Upstream Rate
The upload speed of traffic from the
Gateway to the Internet is displayed. For ADSL connection,
the Upstream Rate is typically 25% of the Downstream
Rate.
NOTE:
The Downstream and Upstream Rates are
affected by distance from and configuration of
the DSL central office.
Downstream Noise Margin
number of decibels (dB) is displayed.
Upstream Noise Margin
For upstream noise, the number
of dB is displayed.
Downstream Attenuation
amount of signal loss is displayed.
Upstream Attenuation
For upstream traffic, the mount
of signal loss is displayed.
Downstream Power
For downstream power, the number
of decibels (referencing a millivolt) is displayed.
Upstream Power
For upstream power, the number of
decibels (referencing a millivolt) is displayed.
Total Bytes Sent
The number of bytes sent is displayed.
Total Bytes Received
The number of bytes received is
displayed.
PVC Connection
For each PVC connection, the table lists the following
information: Index, Status, Link Type, PVC, Encapsulation,
QoS, PCR Rate, and SCR Rate.
Click Refresh to update the on-screen information.
Status > Bridges
The Bridges screen displays information about the
PVC/VLAN and default LAN bridges of the Gateway
For downstream noise, the
For downstream traffic, the
40

Advertisement

Table of Contents
loading

Table of Contents