Rst Synchronization - MSI Z87M GAMING User Manual

RST Synchronization (optional)
If you are using Maximized mode as the Acceleration mode, the data on the hard disk
is not always synchronized with the data in the SSD cache. In some situations, you
may want to manually sync the disks for avoiding data loss.
Follow these steps to sync manually.
1. Reboot system, during the Power-On Self Test (POST) press, press <Ctrl> and
<I> keys simultaneously to enter the Intel Rapid Storage Technology Option ROM.
2. Select option 5 "Acceleration Options" and press <Enter> key. The following
screen appears.
Name
DISK PORT 0
WARNING:
3. Press <S> to synchronize data.
4. When prompted, press <Y> to confirm.
Name
DISK PORT 0
5. Once synchronization is complete, the status will change to In Sync.
Intel RAID
[ ACCELERATION OPTIONS
Type Capacity
Non-RAID Disk 153.4GB
HELP
[
Press 's' to synchronize data from the cache device to
the Accelerated Disk/Volume.
Press 'r' to remove the Disk/Volume Acceleration.
IT IS RECOMMENDED THAT YOU [ERFORM A SYNCHRONIZATION
BEFORE REMOVING ACCELERATION.
[ ↑↓] - Select
[
SYNCHRONIZATION VERIFICATION
5. Exit
SYNCHRONIZING THE DATA MAY TAKE SEVERAL MINUTES.
DISK / VOLUME INFORMATION
[
DO NOT INTERRUPT THE PROCESS!
Are you sure you want to synchronize data to
"DISK PORT 0"? (Y/N):
[ ACCELERATION OPTIONS
Type Capacity
Non-RAID Disk 153.4GB
B-14
]
Mode Status
Maximized No Sync
]
[ESC] - Previous Menu
]
]
]
Mode Status
Maximized In Sync