MSI Adora24 Series User Manual page 20

Overview
RJ-45 LAN Jack
5
The standard RJ-45 LAN jack is provided for connection to the Local Area Network
(LAN). You can connect a network cable to it.
USB 3.0 Port (Optional)
6
The USB 3.0 port is backward-compatible with USB 2.0 devices. It supports up to
5Gbit/s (SuperSpeed) data transfer rate.
7
HDMI-In Port (Optional)
1-8
(with MSI Instant Display Technology)
The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video interface
capable of transmitting uncompressed streams. HDMI supports all TV format, includ-
ing standard, enhanced, or high-definition video, plus multi-channel digital audio on a
single cable.
With MSI Instant Display Technology, when you connect power to the AIO PC success-
fully, the monitor will automatically enter "stand by" mode without pressing the power
button. When devices are connected to the HDMI-in port, the monitor will be turn on
immediately. You can also switch the modes through the Monitor Power / Mode Button
on the side panel if you have already turned on your AIO PC. This technology helps to
save more energy for your system.
Power Jack
8
The AC/DC adapter converts AC power to DC power for this jack. Power supplied
through this jack supplies power to the PC. To prevent damage to the PC, always use
the supplied power adapter.
9 TV Tuner Antenna Connector (Optional)
This connector is provided for digital TV tuner antenna.
Important
1. We suggest that you connect the AC/DC adapter to your AIO PC first and then con-
nect the AC power cord to the socket-outlet for safety concerns.
2. High-speed devices are recommended for USB 3.0 ports whereas low-speed de-
vices, such as mouse or keyboard, are suggested to be plugged into the USB 2.0 ports
on the rear panel.
Yellow
LED Color LED State
Left Yellow Off
On (steady state)
On (brighter & pulsing)
Right Green Off
On
Orange On
Green/ Orange
Condition
LAN link is not established.
LAN link is established.
The computer is communicating with
another computer on the LAN.
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
1000 Mbit/sec data rate is selected.