Administration > Upgrade Firmware; Upgrade Firmware; Status > Device; Device Information - Cisco Linksys WUMC710 User Manual

Linksys WUMC710
Administration > Upgrade Firmware
Use this screen to upgrade the media connector's firmware Do not upgrade
the firmware unless you are experiencing problems with the media connector
or the new firmware has a feature you want to use
Before upgrading the firmware, download the media connector's firmware
upgrade file from the Linksys website, www.Linksys.com/support

Upgrade Firmware

Please select a file to upgrade the firmware
firmware upgrade file Then click Start to Upgrade and follow the on-screen
instructions
Status > Device
The media connector's current status information is displayed
Click Browse and select the

Device Information

Firmware Version
The media connector's current firmware is displayed

Local Network

Local MAC Address
The media connector's MAC Address, as seen on your
local Ethernet network, is displayed
Device IP Address
The media connector's IP Address, as seen on your local
Ethernet network, is displayed
Subnet Mask The Subnet Mask configured for your local network is displayed
Status > Wireless Network
Information about your wireless network is displayed

Wireless

Link Status
The status of the connection to your wireless network is displayed
MAC Address
The media connector's MAC Address, as seen on your local
wireless network, is displayed
Network Name (SSID) The wireless network name or SSID is displayed
Channel Width
The channel width, in MHz, used by your wireless network is
displayed
Channel The channel setting is displayed
Security The security method of your wireless network is displayed
Advanced Configuration
13