BIOS Setup
▶
Intel(R) Rapd Start Technology
Ths feature can make your system fast start up from hbernaton. Ths tem allows
you to enable/ dsable Intel Rapd Start Technology.
▶
Intel(R) Thunderbolt
Press <Enter> to enter the sub-menu.
▶
Wake From Thunderbolt Devces
Settng to [Enabled] allows system to be awakened from the power savng modes
through any event on thunderbolt devce.
▶
Thunderbolt PCIe Cache-lne Sze
Ths tem s used to set PCIe cache lne sze for thunderbolt port.
Note: the avalable settngs depend on the nstalled thunderbolt devce.
▶
Securty Level
Ths tem s used to define the securty level of thunderbolt devce.
▶
SMI/Notfy Support
Ths tem s used to enable/ dsable the system management nterrupton notce for
thunderbolt port.
▶
Thunderbolt Wake Delay
Ths tem s used to set the wake delay tme of thunderbolt devce.
▶
USB Configuraton
Press <Enter> to enter the sub-menu.
▶
USB Controller
Ths tem allows you to enable/ dsable the ntegrated USB 2.0 controller.
▶
Legacy USB Support
Enable or dsable support for USB keyboards, mce and floppy drves. You wll be
able to use these devces wth operatng systems that do not support USB.
▶
Hardware Montor
Press <Enter> to enter the sub-menu.
▶
CPU Smart Fan Target
Controls CPU fan speed automatcally dependng on the current temperature and
to keep t wth a specfic range. If the current CPU temperature reaches the target
value, the smart fan functon wll be actvated.
▶
SYS Fan1/ Fan2 Control
These tems allow users to select how percentage of speed for the SYSFAN1.
▶
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ SYS FAN2 Speed
These tems show the current status of all of the montored hardware devces/ com-
ponents such as CPU temperature/ system temperature and the few fans' speeds.
▶
Intel(R) Smart Connect Configuraton
Press <Enter> to enter the sub-menu.
2-8