Important
You cannot swtch between AHCI and IDE f you already have your operatng system
nstalled. If you have nstalled your OS usng AHCI and you clear your BIOS/ reset to
default settngs, you wll need to change ths functon back to AHCI to ensure proper
functonalty.
▶
SATA1~6 Hot Plug
These tems are used to enable/ dsable the SATA ports hot plug support.
▶
PCIE Port Controller
Ths tem allows you to select the external SATA or IEEE 1394 devce for usng.
▶
External SATA 6GB/s Controller Mode
Ths tem s used to specfy IDE/ AHCI mode for external SATA 6GB/s ports.
▶
Onboard IEEE 1394 Controller
Ths tem allows you to enable/ dsable the IEEE 1394 controller.
▶
HD Audo Controller
Ths tem allows you to enable/ dsable the HD audo controller.
▶
Integrated Graphcs Configuraton
Press <Enter> to enter the sub-menu.
▶
Vrtu Technology
Enable or Dsable Vrtu GPU Swtchng Technology (f supported).
[-Mode]
Provdes power savng features and specal processor
functonalty
[d-Mode]
Uncompromsed 3D performance from the dscrete GPU
▶
Intate Graphc Adapter
Choose whch adapter you wsh to make the prmary opton
[IGD]
Integrated Graphcs Dsplay
[PEG]
PCI-Express Graphcs Devce
▶
Integrated Graphcs Share Memory
The system shares memory to the onboard graphcs. Ths settng controls the exact
memory sze shared to the onboard graphcs.
▶
DVMT Memory
Specfy the sze of DVMT memory to allocate for vdeo memory.
▶
IGD Mult-Montor
Enables both ntegrated and dscrete graphcs at the same tme. When dsabled, t
wll default to Intated Graphcs Adapter selecton.
▶
Intel(R) Rapd Start Technology
Press <Enter> to enter the sub-menu.
MS-7757
2-7