MSI B75MA-E2 User Manual page 27

intel turbo Boost
Enables or disables intel turbo Boost which automatically boosts Cpu perfor-
mance above rated specifications (when applications requests the highest perfor-
mance state of the processor).
My oC Genie
this item is used to select whether oC Genie parameters are customized by user.
Setting to [MSi] oC Genie will use default oC related parameters to overclock the
system. Selecting [Customize] allows you to configure the following related "My
oC Genie option" sub-menu manually for oC Genie.
My oC Genie option
press <Enter> to enter the sub-menu.
My oC Genie Gt overclocking
this item allows you to enable/ disable the overclocking of integrated graphics
for oC Genie function.
My oC Genie Gt ratio
this item allows you to specific the Gt ratio for oC Genie function.
Adjusted My oC Genie Gt ratio
it shows the iGpu frequency when oC Genie is started. read-only.
drAM reference Clock
this item allows you to specific the drAM reference Clock for Cpu. please note
the overclocking behavior is not guaranteed.
drAM Frequency
this item allows you to adjust the drAM frequency. please note the overclocking
behavior is not guaranteed.
Adjusted drAM Frequency
it shows the adjusted drAM frequency. read-only.
Extreme Memory profile (X.M.p)
this item is used to enable/disable the intel Extreme Memory profile (XMp). For
further information please refer to intel's official website.
drAM timing Mode
Select whether drAM timing is controlled by the Spd (Serial presence detect)
EEproM on the drAM module. Setting to [Auto] enables drAM timings and the
following "Advanced drAM Configuration" sub-menu to be determined by BioS
based on the configurations on the Spd. Selecting [Link] or [unlink] allows users
to configure the drAM timings for each channel and the following related "Ad-
vanced drAM Configuration" sub-menu manually.
Advanced drAM Configuration
press <Enter> to enter the sub-menu.
Command rate
this setting controls the drAM command rate.
MS-7808
27