Hitachi 46F510 Operating Manual page 19

CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-P B P R .
1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the
TV set at right.
2. Connect the cable from the C B /P B OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (P B) jack.
3. Connect the cable from the C R /P R OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (P R ) jack.
4. Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.
6. Press the VID1 button, to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO label
disappears automatically after approximately four seconds.
7. Press the ANT button to return to the previous channel.
NOTE: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 12 for tips on REAR PANEL CONNECTIONS.
P
R
P
ANT A
R
INPUT 1
R
TO
CONVERTER
P
R
INPUT 2
ANT B R
R
INPUT 3
R
INPUT 4
AUDIO
TO HI-FI
R
MONITOR
L
OUT
AUDIO
R
DVD Player
OUTPUT
P Y
L R
B
DVI-HDTV
P Y
B
(MONO)/L
P Y/VIDEO
B
(MONO)/L
AUDIO
(MONO)/L VIDEO S-VIDEO
(MONO)/L VIDEO
S-VIDEO
L VIDEO
S-VIDEO
19