Figure 5-8: The Secureeasysetup Logo And Location; Figure 5-9: Secureeasysetup - Linksys WPC54GS User Manual

Wireless-G Notebook Adapter with SpeedBooster
2. Press the Router or Access Point's SecureEasySetup button on its front panel. After approximately two to ten
seconds, the button will turn white and begin to blink.
If your other SecureEasySetup device is not yet installed, Click the Next button to continue and finish the
Router's installation. Then, to install the other device, follow the instructions provided with that device for
SecureEasySetup.
If your other SecureEasySetup device is already installed, press the SecureEasySetup button on that
device within two minutes. (The button on that device may be on the device's software that you will have to
click on-screen.) Click the Next button to continue and finish the Router's installation.
To add other SecureEasySetup devices to your network, follow the instructions provided with each device.
NOTE: You can only add one SecureEasySetup device at a time.
3. SecureEasySetup is now complete and a configuration profile will has been created automatically. You may
save your configuration profile to a text file by clicking the Save button, or print the configuration by clicking
the Print button. Click Connect to Network to connect to your network.
Congratulations! SecureEasySetup is complete.
Chapter 5: Using the Wireless Network Monitor
SecureEasySetup

Figure 5-8: The SecureEasySetup Logo and Location

Figure 5-9: SecureEasySetup

24