Figure 5-9: Wireless Settings Screen - Cisco Linksys WAP54GX User Manual

Wireless-G Access Point with SRX
Configuring the Access Point's Wireless Settings
1. The Setup Wizard will ask you to enter the SSID, Channel, and Network Mode settings for your wireless
network.
SSID - Enter the name of your wireless network. The SSID must be identical for all devices in the network.
The default setting is linksys (all lowercase).
Channel - Select the operating channel for your wireless network. All of your wireless devices will use this
channel to communicate.
Network Mode - Select the wireless standards running on your network. If you have both 802.11g and
802.11b devices in your network, keep the default setting, Mixed Mode. If you have only 802.11g devices,
select G-Only. If you have only 802.11b devices, select B-Only. If you want to disable your wireless network,
select Disable.
Click the Next button to continue or the Back button to return to the previous screen.
Chapter 5: Setting up the Wireless-G Access Point with SRX
Using the Setup Wizard

Figure 5-9: Wireless Settings Screen

14