Specifications; Setup - Chicago Electric 69078 Owner's Manual

Specifications

Electrical Rating
Motor No Load Speed
Maximum Blade Diameter 7-1/4"
Arbor
Depth of Cut
Bevel Capacity
Laser Battery Type
4005982
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following
pages, refer to Parts List and Diagram on page 14.
Functions
Stationary Guard (30)
Dust Outlet
Lower Guard Lever
Saw Blade
(Sold separately)
Outer Flange (32)
Blade Bolt (31)
Figure 1
Page 10
120V~ / 60Hz / 10A
5500 RPM
5/8"
2-7/16" @ 90°
1-5/8" @ 45°
0° to 45°
2 AAA (included)
Auxiliary Handle
Spindle Lock Lever (14)
Angle Gauge
Power ON Light (6)
For technical questions, please call 1-800-444-3353.
DO NOT STARE INTO BEAM
Max. Output: <1 mW,
Wavelength: 650 nm
This product complies with
21 CFR 1040.10 and 1040.11
Diode Mfr.: Zhenjiang Bouncer Stone
Electron Co., LTD, No. 16 Guyang
Xincun Dingmao Zhenjiang City.China
Manufacture Date: ___________, ______
Caution: Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Caution: The use of optical instruments
with this product will increase eye hazard.
Trigger (18)
Lower Guard (39)
Laser Switch (82)
Laser (83)
Angle Lock Knob (71)
Fence Lock Knob (69)
Base (64)
LASER LIGHT
CLASS II LASER PRODUCT
Trigger Lock
Main Handle
Depth Lever (58)
Depth Gauge (62)
Item 69078