Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ORBITAL
JIGSAW
WITH DUST BLOWER
AND LASER CUTTING GUIDE
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS mANUAL.
ITEM 69077
Advertisement
Table of Contents
Related Manuals for Chicago Electric 69077
Summary of Contents for Chicago Electric 69077
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS mANUAL.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 69077... -
Page 3: Electrical Safety
A wrench or a key left attached to a moving part of the power tool may result in personal injury. Item 69077 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Power Tool Use And Care
These carry important safety information. pacemaker interference or pacemaker failure. In If unreadable or missing, contact addition, people with pacemakers should: Harbor Freight Tools for a replacement. • Avoid operating alone. 4. Avoid unintentional starting. • Do not use with power switch locked on. -
Page 5: Vibration Safety
If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 69077 For technical questions, please call 1-800-444-3353. Page 5... - Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-prong plug.) Outlets for 2-prong plug Page 6 For technical questions, please call 1-800-444-3353. Item 69077...
-
Page 7: Extension Cords
Do not cover ventilation ducts. Keep flammable objects away. n 0 xxxx/min. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 69077 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Specifications
Laser Opening Blade Clamp Assembly (7) Dust Port (66) Transparent Guard (1) Dust Blower Lever (53) Fence Lock Knobs (60) Cutting Mode Lever (23) Rip Fence (68) Figure 1 Baseplate (63) Page 8 For technical questions, please call 1-800-444-3353. Item 69077... -
Page 9: Operation
3. Release the Baseplate, checking that the pin on the body is engaged between the teeth of the Baseplate. 4. Press the Angle Adjustment Lever closed to lock the Baseplate in place. Released Position Angle Adjustment Lever Figure 3 Item 69077 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Installing The Rip Fence
The power cord must reach the work area with enough extra length to allow free movement while working. Page 10 For technical questions, please call 1-800-444-3353. Item 69077... -
Page 11: General Operating Instructions
7. Allow the Saw Blade to reach full speed then rest the Baseplate on the workpiece and guide the Saw Blade into the workpiece. Item 69077 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Maintenance
Do not immerse the Jigsaw in liquid. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. Page 12 For technical questions, please call 1-800-444-3353. Item 69077... -
Page 13: Troubleshooting
3. Laser damaged. 3. Have a qualified service technician check the tool for internal damage. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 69077 For technical questions, please call 1-800-444-3353. Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 69077... -
Page 15: Assembly Diagram
Assembly Diagram Item 69077 For technical questions, please call 1-800-444-3353. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.