Table of Contents
Advertisement
General Functions
Turning your handset on
Ensure that your USIM card is in your handset and the
battery is charged.
Press and hold the
Enter the USIM PIN code that was supplied with your
USIM card if PIN code setting is on.
After a few seconds you will be registered on the
network.
Turning your handset off
Press and hold the
There may be some delay while the handset powers
down.
Do not re-power the handset during this time.
26
key until power is on.
key until power is off.
Access Codes
You can use the access codes described in this
section to avoid unauthorized use of your phone.
The access codes (except PUK and PUK2 codes) can
be changed by using the Change codes feature
[Menu 9.6.2].
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code
protects your USIM card against unauthorized use.
The PIN code is usually supplied with the USIM card.
When the PIN Code Request is set to Enable,
your phone will request the PIN code every time it is
switched on. When the PIN Code Request is set to
Disable, your phone connects to the network directly
without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some USIM cards,
is required to access functions such as Fixed Dial
Number. These functions are only available if
supported by your USIM card.
Advertisement
Chapters
Table of Contents
