LG JILSANDER E906 User Manual page 17

Jilsander phone
Table of Contents

Advertisement

You cannot switch on the phone if the battery is fully discharged
It takes approximately four to five minutes to reach a charge
state sufficient for booting by TA charger.
It takes approximately 14-15 minutes longer to charge using a
USB connection.
If the battery is critically low, the image for the critically low
battery will appear to notify you to charge it longer.
NOTE: The battery must be fully charged initially to improve battery
life.
WARNING: Do not connect the charger to the phone
without the battery being installed. You must check the battery is
inserted before charging.
WARNING: Do not remove the battery or USIM card while
charging the phone.
WARNING: There is a risk of explosion if the battery is
replaced by an incorrect type. Dispose of used batteries in
accordance with the manufacturer's instructions.
WARNING: Unplug the charger from the mains and phone
during lightning storms to avoid electric shock or fire.
WARNING: Make sure that no sharp items come into contact
with the battery. This could pose a fire risk.
15

Advertisement

Table of Contents
loading

Table of Contents