Table of Contents
Advertisement
Assembling the Stands
Assembling the Stands
Assembling the Stand Table Unit
1
Take the left stand and right stand out of the
stand unit box, and use the three bolts and
collars for each stand to secure the stands.
•
As shown below, with the bottom of the up/down unit
taken out of the packing box, remove the up/down unit's
three bolts and collars each for the left and for the right.
(Spread cushioning material under the up/down unit to
adjust the height.)
Up/Down Unit
Packing Box
* The bolts and collars which have been removed are not used.
•
Loosely secure the left stand and right stand to
the up/down unit using the bolts (8) for securing
the left and right stands provided, the flat washers
and spring washers which were removed, and the
collars (9) for securing the left and right stands.
Flat Washer
Collar for Securing Left and Right Stands (9)
*
Bolt
Collar*
Spring
Washer
Flat Washer
Bolt for
Securing Left and
Right Stands (8)
Spring Washer
Notice
•
Mount the stands with the sides provided with
the locking casters pointed upward.
2
Tighten bolts A.
•
5
Use a 4 mm (
/
in.) allen key to tighten bolts A,
32
and secure the stand part and the up/down unit.
Right Stand
Left Stand
Assembling the Stands
Bolt A
Bolt A
Installation Manual
37
Advertisement
Table of Contents
