Installation
Affix the installation template label (accessory) to the ceiling or wall, and use a pen to mark the
positions of the screws and cable mounting hole in the ceiling or wall. Remove the installation
template label and attach the camera with 3 screws (locally procured).
Prepare screws (locally procured) according to the condition of the attachment position.
Attach the safety wire to the foundation or other parts of the building with sufficient strength.
Spring
washer
Recommend
screw (M3)
Camera fixing screw x3
(locally procured)
Foundation or
other parts of
the building with
sufficient strength
Safety wire
Installation template label
Recommend
Spring washer
screw (M3)
(accessory)
Foundation or other
Safety wire
parts of the building
with sufficient strength
φ 75 mm
Cable access hole
15