Enhancing Your System - Sharp DK-E7P Operation Manual

Enhancing your system

DK-E7P
ENGLISH
The audio cable is not included. Purchase a separate audio
cable as shown below.
Portable audio
player
Computer
To the line
output socket
Audio cable
(not supplied)
E-9
DK-E7P_A6_EN_SCEE.mif
Listening to the audio/video sounds from por-
table audio player, computer/notebook, etc.
1
Use Audio cable to connect the portable audio
player, computer/notebook etc. to the AUX IN
socket.
When using video equipment, connect the audio output
to this unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power
on.
3
Play the connected equipment.
If volume level of the connected device is too high,
sound distortion may occur. Should this happen, lower
the volume of the connected device.
Notes:
To prevent noise interference, place the unit away from the
television.
Make sure to undock the iPod or iPhone before making any
connections to AUX IN. Otherwise, sound from AUX IN will
not be heard.
2009 September 25