Installing An Expansion Card - Fujitsu PRIMERGY TX100 S2 Options Manual

8.1

Installing an expansion card

Ê Open the server (see section
Figure 22: Removing the slot cover
Ê Remove the screw (see circle).
Ê Remove the slot cover.
V
CAUTION!
Keep the slot cover in a safe place. If you remove the expansion card
again and do not replace it with a new one, then reinstall the slot cover
to comply with EMC regulations and to satisfy cooling requirements and
fire protection measures.
TX100 S2
Expansion cards and parallel interface
"Opening the server" on page
Options Guide
23).
45