Picture Freezing; Power Save Mode - Hitachi L37X01AU User Manual

FUNCTION (continued)

Picture Freezing

By pressing button, you can change to freeze mode
easily anytime you like. Press it again to return to normal
picture.

Power Save Mode

When the AV input is selected
You are provided the function to save power consumption when no signal is detected in AV input. Set to On in "Video
Power Save" from Function Menu, which leads to the power save mode in AV1 /AV2 /AV3 /AV4 /HDMI1 /HDMI2 /HDMI3
and the Standby mode in other AV input. Please see the table below for details.
1. Press button.
2. Select "Setup" menu and press
3. Select "Video Power Save" and press
AV1~AV2,
AV3~AV4,
HDMI1~3
Returning to operating status
Press the Input Select button of the control panel or the remote control to restart the television.
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode: Off) can be set
to be activated automatically when the computer is not being used to reduce power consumption by this unit.
Horizontal
RGB sync
signal
Vertical
PC signal
Operation mode
Indicating lamp
Returning to operating status
Operate the personal computer, then input computer's H. sync, V. sync or press the Sub Power button of the control panel
or the remote control to restart the television.
button.
button.
Video Power Save
When no signal is detected
Condition Indicating Lamp
Power Save*
Yes
Yes
Active
(normal display)
On
Lights green
Freeze button
Off
On
When signal is input during
on in "Video Power Save"
Orange
*Power Save that only control Back Light On/Off.
No
Yes
Blank (no display)
Lights orange
Setup
Video Power Save Off
Reset
Select Set
OK
Turns On automatically
Yes No
No No
Off
Return
50