Audio Setting - Hitachi L37X01AU User Manual

TV SETUP OPERATION (continued)

Audio Setting

You can adjust and customize the audio condition as you like.
1. Press button.
2. Select " Audio" menu and press
3. Select the preferred menu item and press
Selected Items
Audio Mode
Treble
Bass
Balance
Matrix Surround
Dynamic Bass
Perfect Volume
TV Speakers
Reset
button.
button.
Movie
Music
You can select the most suitable sound condition from these 4 items.
You can adjust any value you preferred in "Favorite" item.
Speech
Favorite
-15~+15 Adjust the Treble of the sound.
-15~+15 Adjust the Bass of the sound.
Adjust the balance of the sound comes out from right and left side of
the speakers.
-10~+10
(Notice: When Matrix Surround is enabled, adjusting the Balance will
not completely mute any one speaker.)
The surround sound is mixed to left and right in order to create the
Off
illusion of virtual surround speakers.
(Recommendation: when the Matrix Surround is on, ensure the
On
Balance is set to "0" for optimum surround sound effect.)
Off
Dynamic Bass gives you the enhanced bass sound. Low frequency
signals can be boosted while the output signal amplitude is measured.
On
Automatically adjusts audio input levels to stay within a safe volume
Off
range. For example, when the input sound is too loud, the volume is
automatically decreased.
On
This needs to be switched to Off when you want to listen to audio
Off
from external equipment.
It is normally set to On when you operate the set using the built in
On
speakers.
Each item on this menu screen can be restored to the original factory
settings by pressing
Audio
Audio Mode
Movie
Treble
+15
Bass 0
Balance
0
L
Matrix Surround
Off
Dynamic Bass
Off
Perfect Volume
Off
TV Speakers
On
Reset Reset
Select Set
OK
Setup hint
button.
R
Return
32