Pen - HP TouchSmart tx2 Maintenance And Service Manual

Pen

Description
Pen
Before removing the pen, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Remove the pen:
1. Position the computer with the left side toward you.
2. Press in on the pen (1) to release it from the pen holder.
3. Remove the pen (2) from the pen holder.
Reverse this procedure to install the pen.
Battery on page 38).
Spare part number
516454-001
Component replacement procedures 39