Front Components - HP TouchSmart tx2 Maintenance And Service Manual

Front components

Item
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Component
Display release latch
Power switch*
Power light
Consumer infrared lens
Audio-out (headphone) S/PDIF jack
Audio-out (headphone) jack
Audio-in (microphone) jack
Wireless switch
Function
Opens the computer.
●
When the computer is off, slide the power switch
to the right to turn on the computer.
●
When the computer is on, slide the power switch
to the right to initiate Sleep.
●
When the computer is in the Sleep state, slide
the power switch to the right briefly to exit Sleep.
●
When the computer is in Hibernation, slide the
power switch to the right briefly to exit
Hibernation.
If the computer has stopped responding and Windows
shutdown procedures are not effective, slide the
power switch to the right and hold for at least 5
seconds to turn off the computer.
To learn more about your power settings, select Start
> Control Panel > System and Maintenance >
Power Options.
To learn more about Sleep or Hibernation, refer to the
Power Management guide.
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
Receives a signal from the HP Remote Control.
Provides enhanced audio performance, including
surround sound and other high-end audio output.
Produces sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.
Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.
Turns the wireless feature on or off, but does not
create a wireless connection.
NOTE: A wireless network must be set up in order to
establish a wireless connection.
Front components 9