Picture Menu - Hitachi 42PD5000 User Manual

01 QR58553-英語-初校 03.10.15 10:47 AM ページ17

PICTURE MENU

Picture
Audio
Timer
Function
MENU
Setup
Language
Select
OK Set
Selected characters
Contrast
Brightness
Color
Tint
Picture Enhancement
Color Temperature
Color Temp. Adjustment
Amplitude
Red
Green
Blue
Cut Off
Red
Green
Blue
Reset
OK
Narrows the gap between Broadens the gap between
brightness and darkness. brightness and darkness.
Black is subdued for Black is set off for increased
increased overall darkness. overall brightness.
Darkens colors. Lightens colors.
Enhances red and weakens Enhances green and weakens
green. red.
Off Low Middle
Cool Normal Warm
Off On
Brighter scene is decreased in Brighter scene is increased in
reddish color. reddish color.
Brighter scene is decreased in Brighter scene is increased in
greenish color. greenish color.
Brighter scene is decreased in Brighter scene is increased in
bluish color. bluish color.
Dark scene is decreased in Dark scene is increased in
reddish color. reddish color.
Dark scene is decreased in Dark scene is increased in
greenish color. greenish color.
Dark scene is decreased in Dark scene is increased in
bluish color. bluish color.
(off the function) (waiting to reset)
Picture
Contrast : + 31
Brightness : – 31
Color : 0
Tint : + 31
Picture Enhancement : Off
Color Temperature : Normal
Color Temp.Adjust
Reset Reset
Select Set Return
OK
Picture
Contrast : + 31
Brightness : – 31
Color : 0
Tint : + 31
Picture Enhancement : Off
Color Temperature : Normal
Color Temp.Adjust
Reset Reset
Select OK Set Return
Picture
Contrast : + 31
Brightness : – 31
Color : 0
Tint : + 31
Picture Enhancement : Off
Color Temperature : Normal
Color Temp.Adjust
Reset Reset
OK
Select Set Return
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The color for [+32] to [+40] numbers will change from
white to magenta. This special mode is better for dark scenes.
For brighter scene some parts of the picture might not be clear. We
recommend to set at [+31].
"Panel Life" in the Function Menu should be set to Normal when
Contrast setting is adjusted.
Adjust to taste.
Adjust to taste.
This is not available to adjust when receiving PAL/SECAM signal.
In this case the character will be grayed out.
Adjust for most realistic skin color.
High
Sets the clarity of small details to the desired level.
Black / White
Normally set to Normal.
Turn On when you wish to change color temperature is required to
adjust depending on the user's preference.
Adjust color temperature depending on the user's preference. These
settings are independently stored in each of the 4 Color Temperature
modes.
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
OK
Contrast + 31
Next / Prev Adjust
OK
Color Temperature Normal
Next/Prev Select Return
Picture
Color Temp. Adjust On
Amplitude
Red – 63
OK
Green 0
Blue – 31
Cut Off
Red + 31
Green 0
Blue + 31
Reset Reset
Select On/Off Return
Setup hint
cursor
Return
17