Table of Contents
Advertisement
UMC-200
Menu Navigation
The basic functionality of the UMC-200 has been designed to be as simple and
straightforward as possible. However, as with any device with this much functionality,
there are still quite a few pages of configuration menus. On most menu screens, there are
hints along the bottom that tell you which buttons to use to move to a sub-menu, make an
adjustment, or move up a level. We strongly recommend that you use the on-screen menus
(rather than the front panel display) when making or changing configuration settings on the
UMC-200.
Note: Most of the items shown on the UMC-200's Setup Menus are settings which
you can change or adjust, however some are provided only for information. If you
cannot select an item for adjustment, it means that it cannot be adjusted, although it
may change based on changes made to other parameters on other menu screens.
(One example is that, when setting up the HDMI 1 Input, you can change the
audio associated with that input, and you can change its display name, but you
cannot change the video input associated with it - because HDMI 1 is permanently
associated with the HDMI 1 input connector on the rear panel of the UMC-200.
Another example is that, if you tell the UMC-200 that you don't have Side Surround
speakers, it will also set the Rear Surround speakers to None, and you will be unable
to change that setting unless you re-enable the Side Surround speakers - because
you cannot have only Rear Surround speakers without Side Surround speakers.)
Page 9
Hide quick links:
Advertisement
Table of Contents
