Channel Manager; Auto Channel Scan - Hitachi 42HDT51 Operating Manual

Chan.
Manager
Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel
List.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Power Swivel
Move Sel.
SEL
Press CURSOR PAD , to highlight function, the press the SELECT button to select.
Set The Antenna
This feature will select Antenna options.
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move Select
SEL
Press CURSOR PAD , to highlight function, the press the SELECT button to select.
NOTE: When a CableCARD is installed, antenna settings will be set automatically to "Connect Cable to Ant A only".

Auto Channel Scan

Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move Return
SEL
Press CURSOR PAD , ,
Press CURSOR PAD , to highlight the Start or Clear option.
Press the SELECT button to start Auto Channel Scan.
NOTE: When a CableCARD is installed, Auto Channel Scan will not be available since channels will be fixed based on what was
agreed upon by you and your cable operator.
This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.
, to highlight Ant A or Ant B.

CHANNEL MANAGER

Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Move Return
SEL
Chan. Manager
Set The Antenna
( ) Connect Cable to Ant A and
Air to Ant B
( ) Connect Cable to Ant A only
( ) Connect Air to Ant A only
Cable Source
Cable(1)
Move Return
SEL
Chan. Manager
Auto Chan. Scan
Ant A
Auto Channel Scan
Start
Ant B
Auto Channel Scan
Start
Move Return
SEL
60
Cable(2)
Clear
Clear