Canon EOS 30D White Paper page 17

and press photography, sports and entertainment. It allows
image transfer via wired or wireless LANs compliant with
IEEE 802.11 b/g and 100-BaseT Ethernet.
The Data Verification Kit DVK-E2 addresses a substantial
issue in digital photography: it allows tampering with image
data to be detected. The kit is for use in fields in which high
levels of image authentication are required, such as press reporting, law enforcement
and insurance work.
The optional Battery Charger CA-PS400 allows the user to charge two BP-511/511A/
512/514 battery packs at the same time. The CG-580 (plugs directly into an outlet,
charges BP-500 series batteries) and CB-5L (corded) are single battery chargers. (CG-580
is supplied with the EOS 30D.)
Included with the camera are the Video Cable VC-100 and the USB Interface Cable
IFC-400PCU.
There are some EOS System accessories that have restrictions on their functions when
they are used with the EOS 20D and 30D. Any system accessories not listed here is
completely compatible with the EOS 30D:
Accessories with Restrictions
Interchangeable Lenses
Lens Mount Converter FD-EOS
Macro Lens Mount Converter FD-EOS
Speedlites
480EG
540EZ
430EZ
420EZ
ML-3
300EZ
200E
Wired multi-Speedlite accessories
Remote Control
Remote Switch 60T3
Wireless Remote Controller LC-3
Wireless Remote Controller LC-4
IV. SOFTWARE AND EXTENDED COMPATIBILITY
Although it can be used with manual exposure, exposure error occurs. Therefore,
these items will be officially listed as incompatible.
Compatible with external flash metering and manual flash
(TTL autoflash not possible).
Compatible with manual flash (does not fire in A-TTL/
TTL autoflash modes).
Not compatible (since it only has autoflash modes, it cannot fire).
Not compatible (since it cannot fire in Manual flash mode
when used with TTL hot shoe adapter).
Compatible when used with RA-N3.
Compatible when used with RA-N3.
The 1SR cannot cancel the auto power off mode. Also, shutter release is
not possible while the metering timer is not active.
When it is ON, shutter release may not work when the shutter button is
pressed completely in one stroke.
The 1SR cannot cancel the auto power off mode. Also, shutter release is
not possible while the metering timer is not active.
When it is ON, shutter release may not work when the shutter button is
pressed completely in one stroke.
Data Verification Kit
DVK-E2
17