Dell OptiPlex 980 Service Manual page 18

Some graphics cards require the SERR Message mechanism be disabled.
Image Server
Lookup Method Specifies how the ImageServer looks up the server address.
Static IP
DNS
NOTE: You must set the Integrated NIC to Enable with ImageServer to set the Lookup Method.
ImageServer IP Specifies the primary static IP address of the ImageServer with which the client software communicates.
The default IP address is 255.255.255.255
NOTE: You must set the "Integrated NIC" control in the "System Configuration" group to "Enabled with ImageServer" and when "Lookup Method"
is set to "Static IP".
ImageServer Specifies the primary IP port of the image server with which the client software communicates.
Port
The default IP port is 06910
NOTE: You must set the "Integrated NIC" control in the "System Configuration" group to "Enabled with ImageServer".
Client DHCP Specifies how the client obtains the IP address.
Static IP
DHCP (default)
NOTE: You must set the "Integrated NIC" control in the "System Configuration" group to "Enabled with ImageServer".
Client IP Specifies the static IP address of the client.
The default IP address is 255.255.255.255
NOTE: To set Client IP you must set Client DHCP to Static IP
Client Specifies the subnet mask for the client.
SubnetMask
The default setting is 255.255.255.255
NOTE: To set Client SubnetMask you must set Client DHCP to Static IP
Client Gateway Specifies the gateway IP address for the client.
The default setting is 255.255.255.255
NOTE: To set Client SubnetMask you must set Client DHCP to Static IP
License Status Displays the current license status.
Post Behavior
Fast Boot When enabled (default), your computer starts more quickly because it skips certain configurations and tests.
NumLock Enables or disables the NumLock feature when your computer starts.
LED
When enabled (default), this option activates the numeric and mathematical features shown at the top of each key. When disabled, this option activates
the cursor-control functions labeled on the bottom of each key
POST Allows you to specify the function keys to display on the screen when the computer starts.
Hotkeys
Enable F2 = Setup (enabled by default)
Enable F12 = Boot menu (enabled by default)
Keyboard Enables or disables keyboard error reporting when the computer starts.
Errors
This option is enabled by default.
sign-on displays a message stating the keystroke sequence required to enter the Manageability Engine BIOS Extensions(MEBx) Setup program.
MEBx
Hotkey
This option is enabled by default.
System Logs
BIOS Events
Back to Contents Page
Displays the system event log and allows you to:
Clear Log
Mark all Entries