Thermos T420 Product Manual page 18

Insert the straight end (without hole) of the short tank exclusion wire into the hole on right front leg. Attach the other end (with
ASSEMBLY
3
hole) to right rear leg with #8x3/8" sheet metal screw, as shown (A).
Insert the straight end (without hole) of the long tank exclusion wire into the hole on right front leg. Attach the other end (with hole)
to bottom shelf with #8x3/8" sheet metal screw, as shown (B).
Turn assembly upside down.
4
Insert axle rod through wheel, axle spacer, legs and other axle spacer and wheel. Attach with 8mm flat washer and
hitch pin.
Push leg extenders into right legs.
1" Hitch Pin
Qty. 1
Axle Spacer
Axle Washer
Qty: 2
Qty: 1
"Cone" side of wheel against leg
18
A
#8x3/8"
Sheet Metal Screw
Tank Exclusion Wire, Short
Wheel
Axle Rod
Axle Spacer
Tank Exclusion Wire, Long
Qty. 2
B
Leg Extender
Axle Washer
Hitch Pin