Advertisement
Control Locators
(2) LIGHTING REMOTE CONTROL
Brightness-(8 in all)
Brightness+(8 in all)
green
R
G
red
light green
orange
Static cyan
dark yellow
light blue
yellow
Increase green
Increase red
Decrease green
Decrease red
LED LIGHTING CONTROL FUNCTION
To control the LED lighting use the Infra-red Remote Control handset, which has 28 buttons, the function
of each button is as in the table below:
Brightness+ (8 in all)
Brightness- (8 in all)
RED (R)
GREEN (G)
ORANGE
LIGHT GREEN
DARK YELLOW
BLUE
YELLOW
LIGHT BLUE
Increase RED
Increase GREEN
Decrease RED
Decrease GREEN
6
Play/Pause
Dimmer
blue
B
W
white
dark blue
FLASH
7- colour fast colour change
brown
STROBE
colour fade in & out - adjustable
Pink
FADE
7- colour fade change - adjustable
Increase blue
SMOOTH
3- colour slow colour change
Decrease blue
DIY
DIY (adjustment of colour by the user)
Run/Pause
Dimmer (Press and hold + 5 seconds)
BLUE (B)
WHITE (W)
DARK BLUE
7-colour fast colour change
BROWN
STROBE: Colour fade out & fade in -adjustable
PINK
FADE: 7-colour slow colour change -adjustable
Increase BLUE
SMOOTH: 3-colour slow colour change -adjustable
Decrease BLUE
DIY (adjustment of colour by the user)
Unpacking
1
Remove packing materials from unit.
Note: Save all packing materials.
2
Remove plastic safety cover from A/C plug.
3
Remove tie from A/C cord
Power Source
1
Unwind the AC POWER CORD at the back
of the unit and connect it to a power outlet.
2
Plug A/C cord into appropriate outlet.
AC
Polarized Plug
Note: This product may be equipped with a
polaized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet try reversing the plug,
if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
3
Install 2 AAA batteries (not included) in
remote control.
4
Plug A/C cord into appropriate outlet.
Basic Operation
General
1
Make sure the unit is plugged in correctly to an
AC outlet.
2
Press the POWER button to turn on the main
power. This button should be left pressed in even
when the unit is not in use. If the main power is
turned off, all preset radio stations will be lost
and will have to be reprogrammed.
3
Press the STAND BY button to turn on the
unit power. The STAND BY button should be
used to turn the unit on or off.
4
Once the Power is turned on, press the
FUNCTION button to switch between
Tuner/CD/iPod/Aux.
5
While listening to any of the above functions, you
may change the tone of the music by pressing
the EQ button. Each press of the EQ button will
toggle between the following settings:
PA S S
C L A S S I C
R O C K
P O P
6
You can also enhance the bass sounds by using
the BBS feature. Press the BBS button to turn
this feature on.
J A Z Z
7
Advertisement
