Error Displays - Clarion FZ501 Owner's Manual & Installation Manual

USB Devices
Problem
USB device cannot
be inserted.
USB device is not
recognized.
No sound heard
with the display "No
File" shown.
Sound skips or is
noisy.
Bluetooth
Problem
C a n n o t p a i r t h e
Bluetooth enabled
device with the car
audio system.
The audio quality
is poor after
connection with a
Bluetooth-enabled
device.

6. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
ERROR 2
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
* When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
23
Cause
The USB device has been
inserted with wrong direction.
The USB connector is broken.
The USB device is damaged.
Connectors are loose.
No MP3/WMA file is stored in
the USB device.
MP3/WMA files are not encoded
properly.
Cause
The device does not support the
profiles required for the system.
The Bluetooth function of the
device is not enabled.
The microphone is not correctly
positioned.
The Bluetooth reception is poor.
Cause
Do not support iPod & iPhone.
Measure
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Measure
Use another device to connect.
Refer to the user manual of the device for how
to enable the function.
Adjust the position of the microphone.
For example, stick the microphone onto the
dashboard where close to the driver.
Move the device closer to the car audio system
or remove any obstacle between the device
and the system.
Measure
Change another device.
* The head unit will return to RADIO mode.