WeiderPro 831.14923.1 User Manual page 21

32. Route the High Cable (44) around a Pulley (69).
Attach the Pulley (69) and a Cable Trap (71) to
the Right Butterfly Pulley Bracket (21) with an
M10 x 47mm Bolt (91) and an M10 Locknut (74).
Make sure that the Cable Trap is oriented
to hold the High Cable in the groove of the
Pulley.
33. Route the High Cable (44) around a Pulley (69).
Attach the Pulley (69) to the indicated bracket
on the Upright (5) with an M10 x 43mm Bolt (65)
and an M10 Locknut (74).
34. Route the High Cable (44) around a Pulley (69).
Attach the Pulley (69) and a Cable Trap (71)
to the Left Butterfly Pulley Bracket (20) with an
M10 x 47mm Bolt (91) and an M10 Locknut (74).
Make sure that the Cable Trap is oriented
to hold the High Cable in the groove of the
Pulley.
32
71
69
21
91
33
69
44
34
20
21
74
44
74
5
65
74
71
44
69
91