Hitachi VM-H39A Instruction Manual page 33

IDENTIFICATION AND OPERATION OF CONTROLS
Right side/Rear Illustration
13. Diopter Control
To use the electronic viewfinder without eyeglasses on, turn this control ring for your
optimum focus adjustment.
14. Start/Stop Button
This button is used to control the camera/recorder. When the power switch is set to
"CAMERA" position, pressing this button starts the tape to begin recording. "REC"
appears in the viewfinder.
When this button is pressed again, "PAUSE" appears instead of "REC" and the tape
stops and the camera/recorder enters the record/pause (stand-by) mode.
15. Power Zoom Switch
This switch performs zooming electronically.
"W": Picture becomes wider gradually.
"T": Picture becomes telescopic gradually.
16. Camera Light Shoe
Used to attach the camera light.
17. "AV IN/OUT" Jack (Behind the door)
Use the RF output adapter (provided) to connect this jack to a TV to view the pictures
played back by the camera/recorder.
Use the AV input cord (provided) to connect this jack to a TV or VCR to record pictures
from the VCR or TV.
18. Hand Strap
Adjust to best fit your hand.
19. Power Supply Attachment Section
Attach the battery (provided) or external power adapter (provided) here.
20. Date/Time Battery Compartment
Pull the battery holder and install the date/time battery (provided).
33