Table of Contents
Advertisement
10e. Sequencing show playback
1.
Press show buttons 1 & 2. The active show LED will flash continuously and the LCD will
display the selected show number followed by the sequencing show steps- "S1-2:1-99". (Note:
in this mode the shows will continue to loop from one to the other. Speed and Fade buttons
do not have any effect in show playback as speed and fade times were recorded in show
record mode).
2.
To disengage a show, press the show button you wish to turn off. The show button LED
will turn off confirming that it will no longer be included in the sequence.
10f. Mix show playback
1.
Press and hold down either recorded show button 1 or 2, then press the other show
button and release both simultaneously. Both show LED's will then flash continuously
indicating that they are in mix show playback mode.
2. To exit this mode, press either show button twice.
10g. Strobe playback
1. Press "STROBE" button when effect is desired.
2. This function complies with HTP principle(Higher takes precedence) if a chase 1-8 or
show 1-2 is selected.
11. Audio / Manual
When running chases or shows, you can also select between running them in audio or manual modes.
11a. Activating audio mode
1. While playing chases or shows back, press the "MODE" button. An indicator light will
illuminate in the LCD next to the AUDIO silk screen. This confirms you are in audio or sound
active mode. Your chases and shows will now be triggered to sound via an internal
microphone in the DMX Duo.
2. To exit audio mode, press the "MODE" button twice. Your chases and shows will now
return to the default speed and fade times.
11b. Activating manual mode
1. While playing chases or shows back, press the "MODE" button twice. An indicator light
will illuminate in the LCD next to the MANUAL silk screen. This confirms you are in manual
mode. Your chases and shows can now be triggered manually by using the
"UP/DOWN" buttons. The UP button will advance your chase or show one step each time it is
pressed and the DOWN button will go back one step each time it is pressed.
2. To exit manual mode, press the "MODE" button once. Your chases and shows will now
return to the default speed and fade times.
12. Fog Machine
The "FOG" button is used to trigger an analog 5 pin (midi style connector) remote fog machine. This
button is a momentary function so it will trigger your fogger as long as you hold the button down.
Compatible foggers include: MB-1000, STALLION, VAPORIZOR, VAPOR FLOW, FOG STORM-1200
and FOG STORM-1700.
9
Advertisement
Table of Contents
