DMX DUO Table of contents 1. General Introduction..................3 2. Safety Rules......................3 2a. Warnings 2b. Cautions 3. Information Notice....................3 4. FX On/Off & FX Timer..................4 4a. Manual On/Off control of FX buttons 1-8 4b. FX Timer 5. Recording Chases....................4 6. Editing Chases....................4-5 6a.
DMX controller availible on the market today. Any group of scenes that have been programmed into a universal DMX controller can simply be downloaded into the DMX Duo for easy playback. In many cases, the DMX Duo is pre-programmed at the factory when sold in system packages.
6, 8 in sequence. As a result, the Record LED will illuminate. (Note: if you do not have a DMX controller connected to the DMX input of the DMX Duo as described in the previous step, you will not be able to access the Record mode).
6, 8 in sequence. As a result, the Record LED will illuminate. (Note: if you do not have a DMX controller connected to the DMX input of the DMX Duo as described in the previous step, you will not be able to access the Record mode).
6, 8 in sequence. As a result, the record LED will illuminate. (Note: if you do not have a DMX controller connected to the DMX input of the DMX Duo as described in the previous step, you will not be able to access the Record mode).
6, 8 in sequence. As a result, the Record LED will illuminate. (Note: if you do not have a DMX controller connected to the DMX input of the DMX Duo as described in the previous step, you will not be able to access the Record mode).
10. Playback 10a. Chase Playback Chases can be played back in two modes- “Sequence“ or “Mix“. Sequence mode allows for chases to be played back one at a time. All eight chases can be selected at one time. However, the chase with the flashing LED is the only active chase running at the given time. Once that chase has finished, the next selected chase will automatically begin to run and it’s LED will begin to flash until it finishes.
LCD next to the AUDIO silk screen. This confirms you are in audio or sound active mode. Your chases and shows will now be triggered to sound via an internal microphone in the DMX Duo. 2. To exit audio mode, press the “MODE“ button twice. Your chases and shows will now return to the default speed and fade times.
Press “BLACK-OUT“ to exit. 14. Blackout Setup This feature allows you to set your DMX Duo to activate or deactivate black out on power up. Deactivating allows you to automatically begin playback of chases and shows on power up. Flip the power switch to the “OFF“ position.