Product Status Messages - Epson Stylus NX430 User Manual

Product Status Messages

You can often diagnose problems with your product by checking the messages on its LCD screen.
LCD screen
message/code
Paper out
Paper jam
Combination of IP
address and subnet
mask is invalid
A printer's ink pad is at
the end of its service life Epson for support.
A printer's ink pad is
nearing the end of its
service life
Communication error
Operation canceled. No Make sure the memory card is inserted correctly and meets the
memory card
recognized.
Recovery mode
Printer error
Parent topic:
Related concepts
Check Cartridge Status
Related references
Paper Jam Problems
Condition/solution
No paper is loaded. Load paper in the product
Paper is jammed in the product. Remove the jammed paper, then press the
start button to clear the error.
There is a problem with the network connection to your product.
The ink pad is at the end of its service life. Turn off the product and contact
The ink pads are near the end of their service life. Contact Epson for support.
(To continue printing, press the
Make sure the computer is connected to your product and your software is
installed correctly.
specifications for your product.
An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
A fatal error has occurred. Turn the product off and then back on again. If the
error continues, check for a paper jam. If there is no paper jam, contact
Epson for support.
Solving Problems
start button.)
174