Table of Contents
Advertisement
ELECTRONIC VIEWFINDER (EVF)
cleaning.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as
practical".
ELECTRONIC VIEWFINDER (EVF)
S et the viewfinder to the position shown in the figure when carrying the camcorder or storing it in the carrying
case.
T urn the viewfinder to the position shown below when shooting pictures.
1. Turn the viewfinder.
2. Turn the eyepiece.
Y ou can adjust the position and angle of the viewfinder so you can see through it easily.
CAUTIONS:
• Do not force the viewfinder to rotate completely around. This will damage the viewfinder and/or camcorder.
• When pulling the viewfinder out or returning it to its original position, hold the viewfinder by the swivel section.
Do not hold the diopter control side.
EYEPIECE ADJUSTMENT
- 8 -
Advertisement
Table of Contents
